Showing posts with label Tips and Tutorials. Show all posts
Showing posts with label Tips and Tutorials. Show all posts

October 4, 2018

DIY Glow-in-the-Dark Alien Necklace


My junior high days have come back to haunt me. Mini backpacks, plaid skirts, scrunchies, chokers, and overalls are everywhere. Admittedly, I'm happy about some of those things. But what makes me the happiest is seeing alien-themed items.




1.  You'll need a guitar pick, glow-in-the-dark spray, a Sharpie, a pencil, pliers, sealant spray, ball chain, a jump ring, and a metal hole punch. Optional items are a hammer, a nail, suede cord, a lobster claw, a jump ring, two small jump rings, and two end crimps.
2.  Punch or use a hammer and nail to create a hole in the guitar pick.
3.  Sketch oval eyes on the guitar pick.
4.  Spray the guitar pick with glow-in-the-dark spray. Allow the paint to dry for 15 minutes and spray another coat. Allow to dry for an hour.
5.  Trace and fill in the eye outline with a Sharpie.
6.  Spray the pick with sealant. Allow 15 minutes between coats. Allow to dry for an hour after the last coat.
7.  Attach the jump ring to the guitar pick.
8.  Optional: Use suede cord, end crimps, a jump ring, small jump rings, and a lobster claw to make a necklace.
9.  Slide alien pendant onto necklace.

-Mandy

August 1, 2018

DIY Flamingo Headband


It's been a while! This project is the first post in five months. As of tomorrow, this site will go back to its original address of www.mandycrandell.blogspot.com. The reason? Life changes... especially in nine years since creating this blog. Projects, jewelry, and roadside adventures will still be posted, just less frequently.

Now, onto the project.



1.  You'll need a template, headband, pink felt, black felt, pipe cleaners, large pom pom, needle, black thread, pink thread, scissors, hot glue gun, hot glue sticks, white fabric paint, and black fabric paint. (The headband and pom pom pencil came from the dollar store.)
2.  Cut out two circles from pink felt.
3.  Cut out two head and two beak pieces.
4.  Hot glue the beak pieces to the head pieces.
5.  Use black thread to sew the beak pieces together.
6.  Cut out three feather pieces.
7.  Use pink thread to stitch the head pieces together. Insert the pipe cleaner before stitching shut.
8.  Stitch the head to the pom pom.
9.  Glue one of the circle pieces to the underside of the headband. Glue the other circle to the topside of the headband over the other piece.
10.  Glue the three feather pieces to the top circle.
11.  Glue the pom pom to the top circle piece.
12.  Use the fabric paint to add closed eyes and white beak details.

-Mandy

October 30, 2017

DIY Day of the Dead Wreath


Day of the Dead is celebrated from October 31 to November 2, but I think sugar skulls should be displayed all year round.



To make this wreath:
You'll need a foam wreath form, various colors of felt, fabric paint, scissors, this pattern, a hot glue gun, and hot glue sticks. The felt skulls I used came from Target, but I scanned one to create the pattern.


1.  Cut black felt into strips.
2.  Wrap strips around wreath form hot gluing as you go.
3.  The entire wreath should be covered with felt.
4.  Take a strip and glue along the edge. Fold it in half the long way.  Form a loop and glue the ends together.
5.  Glue the loop to the back of the wreath.
6.  Cut out the skull piece using white felt. Use fabric paint to create the eyes, nose, and mouth. Let dry. You can also cut those areas out of the skull and glue the piece to black piece of felt.
7.  Glue the skull to the wreath.
8.  Cut out eight bone pieces. Glue two of them together to form a flower.
9.  Cut out four or more leaf pieces. Glue one to the back of the bone flower. Repeat steps 8 and 9 for the other bone flowers.
10.  Cut out the spiral flower pieces.
11.  Begin at one end and roll the spiral hot gluing as you go. Repeat this step four more times.
12.  You should now have a rose.
13.  Glue the roses to the bone flowers.
14.  Glue the flowers to the wreath.
15.  Use fabric paint to decorate the skull.

-Mandy

October 23, 2017

DIY Voodoo Doll Costume


The oldest decided to be a voodoo doll for Halloween this year.


To create your own costume:
You'll need black and red felt, scissors, black pipe cleaners, large pom poms, a hot glue gun, glue sticks, a needle, black thread, a tan dress, and an exacto knife (optional).



1.  Fold a piece of red felt in half and cut a teardrop shape.
2.  Unfold piece to a heart shape. Trim if necessary.
3.  Cut out a second heart shape.
4.  Use an exacto knife or scissors to make a small slit in one of the heart pieces.
5.  Make another slit or two.
6.  Cut pipe cleaners in half.
7.  Glue pom poms to one end of the pipe cleaners to create "pins".
8.  Slide the pins into the slits.
9.  Lay the other heart shape under the slit one. Glue the pins to the bottom heart.
10.  Glue the heart pieces together.
11.  Your heart piece is complete.
12.  Cut "stitches" out of black felt.

Use black thread to stitch the heart and stitches to the tan dress. Use makeup to add stitches to your face.

-Mandy

October 16, 2017

DIY Voodoo Doll


The oldest is dressing as a voodoo doll for Halloween, and I made a doll to go along with her costume.


Download the pattern here.  Print the file at actual size.


1. You'll need tan felt, red felt, a button, needle, black thread, craft wire, pliers, wire cutters, beads, scissors, black fabric paint, polyfil (not pictured), and the pattern.

2.  Print out the pattern. Cut out the pattern pieces and use them to cut out the fabric pieces.

3.  Sew the button onto one of the head pieces.

4.  Cut off a piece of craft wire and make a tiny bend about .75" from one end.

5.  Slide a bead onto the wire and curl the end.

6.  Bend the wire to make a v shape. Poke it through the heart piece in two places.

7.  Make a tiny bend at the other end of the wire.  Repeat Step 5.

8.  Sew the heart onto one of the body pieces.

9.  Stitch the two body pieces together and stuff with polyfil. The more haphazard the stitching, the better. Stitch two leg pieces together and stuff.  Sew the leg to the body. Do the same with the remaining leg, arms, and head. Finish by adding stitches with fabric paint.


I'll be posting a separate tutorial for the voodoo doll costume.

-Mandy 

October 4, 2017

Ocean Hair Pins





A new mermaid shirt required new hair pins.  

You'll need:
- two bobby pins
- felt
- fabric scissors
- hot glue gun and glue sticks
- fabric paint

These hair pins don't take long at all.  The fabric paint will dry quickly as long as the dots aren't too thick.

-Mandy


June 23, 2015

DIY Star Wars Fabric Converse


I couldn't bear parting with my old pair of navy Converse.  Instead, I upcycled them using my brother's old Star Wars sheets.


This project is an updated version of my Map Shoes.

You'll need fabric, a pair of shoes, Fabric Mod Podge, scissors, an exacto knife, and a paintbrush.



1.  Begin by removing the laces and coating one side of the shoe with Fabric Mod Podge.
2.  Cut out a piece of fabric and lay it onto the coated shoe.  Rub the fabric so that it sticks to the shoe.
3.  Using scissors, cut along the top silhouette of the shoe.
4.  Using the exacto, press the fabric into the tight corners along the shoe.  You may need to do this a few times.  Allow to dry.
5.  Once dry, trim all excess fabric.
6.  Seal the edges of the fabric with Mod Podge.  Allow to dry.
7.  Using the exacto, puncture holes through the fabric covering the eyelets.
8.  Repeat steps 1 thru 7 on the other side, then on the other shoe.
9.  Relace both shoes, and you're finished!

If using Converse sneakers, you may choose to cover the tongue and heel with fabric.  I didn't since the fabric used was similar in color to the shoe.

-Mandy

October 21, 2014

DIY Boot Covers




For about $10, you can make a pair of boot covers for your Halloween or cosplay outfit.  These are children's boots, and it only cost me half of that.

You'll need felt, velcro, scissors, fabric glue, elastic, needle, thread, a white pencil, and a pair of boots.  The template is your boot, and the white pencil is used to outline where you want to cut.  The two boots pieces can be glued together.  It's best to sew them if the cover is for a child since they will more likely fidget with them.

-Mandy

August 26, 2014

Queen of Hearts Bow Necklace


Here's a fun craft for the Alice in Wonderland/card game fans.


1.  You'll need a playing card, washi tape, a small hole punch, scissors, pliers, chain, and jewelry findings.  You can always switch out the chain and jewelry findings for string.
2.  Begin by folding a playing card along the long edge of the card.
3.  Now fold the card backward.  Repeat steps 2 and 3 to the other edge of the card.
4.  Your card should now have an accordion fold.
5.  Find the middle of the folded card and press down with your fingers.
6.  Cut off a piece of washi tape and wrap it around the middle.
7.  Fan out the folded ends.
8.  You should now have a bow.
9.  Punch a hole in the top two corners of the bow.
10.  Attach a small jump ring and chain (to your desired length) to one of the holes.  Repeat on the other side.
11.  Find the middle of the chain and pull it apart.  Attach jump rings and a clasp.
12.  Your necklace is ready to wear.

-Mandy

August 27, 2013

DIY Front/Back Stud Earrings


Have you ever worn front/back earrings?  I always thought they were cute but never found a pair that I liked.


1.  You'll need tiny toys/erasers, blank earrings studs, an exacto knife, and jewelry glue.  I found my dinosaurs on Amazon.
2.  Cut your toy in half.
3.  Glue the posts to the front half of the toy.  Allow to dry.
4.  Carve out a bowl shape into the back ends of the toy.  Make sure the earrings back fits inside of the curve.
5.  Squeeze some glue into the inside of the bowl shape and press in the earring back.  Allow to dry.
6.  Once the glue is completely dry, connect the earring together.

-Mandy

May 7, 2013

DIY Rockabilly Headband


Do you have trouble finding headbands that stay on your head?  When I do find them, they usually dig into my head causing a headache later.  So, what's the solution?  A wire headband.


1.  You'll need a yard of fabric, scissors, measuring tape, craft wire, wire cutters (scissors work too), a needle, thread, and Fray Check (optional).
2.  Measure your head.  Mine was 21".  I added an extra 8" for twisting.
3.  Measure and cut out the length of your fabric.
4.  Now cut that piece to 6" wide.  This made my piece of fabric 29" x 6".
5.  Fold your fabric in half (3" wide) and make sure that the 'bad' side is facing out.  Cut a pointed tip at each end of the fabric.
6.  Sew your piece inside out either by hand or with a machine.  I chose to do a whip stitch.  Be sure not to sew the piece shut.
7.  Push your fabric through the open end to turn the fabric right side out.
8.  Measure a piece of  wire that is 1" longer than the length of your head measurement + the added 8".  Bend the wire at each end to make a loop.  This will prevent the wire from breaking through the material.
9.  Insert the wire into the fabric.
10.  Finish sewing the open end of the piece.
11.  Wrap your headband around your head and twist!

I seriously love these.  I've made two so far, and a third is on its way.

-Mandy

March 5, 2013

DIY Photo Candles


Here's a fun project that makes a great gift for friends and family.


1.  You'll need wax paper, a pieces of cardstock, white tissue paper, scissors, a hair dryer, a printer, tape, and candles.
2.  Take a piece of cardstock and tape a piece of tissue paper to it.  Keep the tissue paper taut so that it doesn't jam in the printer.
3.  In your photo editing program, size your images to fit on the candles and print.
4.  Cut out your images.  Leave a small border all the way around.
5.  Place your image on a candle and wrap a piece of wax paper around the image and candle.  Make sure that the waxy side faces the image.  Turn the hair dryer on its highest setting.  The image will start to turn darker, and you may notice some wax "sweat".
6.  Once the entire image is dark, peel away the wax paper.  You now have a unique photo candle!

Be very careful when blow drying the candle.  Your hands might get hot.

-Mandy

September 11, 2012

No-Sew Necktie Wallet


Here's a perfect DIY project for your favorite guy!  It's also great for the non crafty-capable.  :)


1.  You'll need a necktie, scissors, seam ripper, permanent fabric tape (or fabric glue), and sticky back velcro dots.  You can choose to turn this into a sewing project if you want.
2.  Use the seam ripper to remove any tags and extra bits.
3.  Now use the seam ripper to remove the stitches along the length of the tie.
4.  Cut the tie to your desired size.
5.  Open up the tie.
6.  Place a strip fabric tape along the bottom of the fully open tie.
7.  Remove the paper and fold the bottom of the tie up.  You should have a clean hem.
8.  Place another strip of tape along the hem.
9.  Fold in one side of the tie.  Add another strip of tape along the inside edge of the other side of the tie.
10.  Remove the paper and fold the side in.  The wallet should look "sewn".
11.  Add a set of velcro dots to the wallet.
12.  Your wallet is complete!

-Mandy


August 28, 2012

How to Make a Constellation Jar


Capture the night sky in a jar!


1.  You'll need a jar, construction paper, scissors, paper punches, and an LED tea light.
2.  Cut a piece of construction paper that fits your jar.  
3.  Punch holes of different sizes into your paper.  You can also use a star paper punch.
4.  Roll your paper into a cylinder shape and push into the jar.
5.  Make sure the paper fits nicely inside.
6.  Add an LED tea light or a glow stick to your jar for a pretty constellation look.

-Mandy

June 19, 2012

DIY Dinosaur Planters


Have you seen these planters before?  I almost died when I saw them.  They're just so awesome, and I knew I needed one.


1.  You'll need a plastic dinosaur ($1 at Walmart), a small plant with soil, a utility knife, and paint (optional).
2.  Cut an opening in the dinosaur's back that is large enough for your plant.  Make sure that the blade in your knife is new.  This will make cutting easier, and if you happen to cut yourself, you're better off with a sharp blade (TRUST ME).
3.  Poke holes into the belly of your dinosaur for water to drain.  I used the same knife for these holes.  Optional:  Paint your dinosaur.  You may want two or tree coats.  Allow for dry time between each coat.
4.  Add your plant with soil to the planter.

At the last minute, I decided not to paint my dinosaurs.  I preferred them in their natural state.  :)

-Mandy

June 12, 2012

Make Your Own Record Coasters


Here's a little project for the music lovers. :)


1.  You'll need coasters, paint, brushes, Mod Podge Outdoor, a pencil, and something to trace around.
2.  Use a round object (a quarter or film canister) to trace a circular shape onto your coaster.  I found these cork coasters for less than $1 at Walmart.
3.  Paint a black ring around the outside of the traced circle.  Let dry.
4.  With a color of your choice, paint the inside of the traced circle.  Let dry.
5.  Paint a small black or white dot in the center of the traced circle.  Let dry.
6.  With a very thin brush, paint some white or grey curved lines on the black ring of the coaster.  Let dry.
7.  Apply a layer of Mod Podge Outdoor.  You may want to apply a few extra thin layers.
8.  Once the Mod Podge has dried, your coasters are ready to use!

-Mandy

June 5, 2012

How to Make Barefoot Sandals


For her beach wedding, my sister-in-law asked me to make barefoot sandals for her and my nieces.  It ended up being a pretty simple and fun project (until I ran out of beads).


1.  You'll need small plastic beads, stretch cord, a ruler, and scissors.
2.  Starting with about 18 inches of string cord, string on some very small beads.  I used about 40 seed beads for these.  Push them to the center of the cord.  These will form the loop around the toe.
3.  Bring the ends of the cord together and put them through a larger bead.
4.  String on a few more larger beads making a straight line.
5.  Separate the ends again.  Right now your sandal should look like a Y with a loop at the end.  Now you'll form the ankle strap.  String on more beads
6.  Slide the sandal onto your foot.  Knot the ends of the stretch cord together.

This is just one of many variations of the barefoot sandal.  They're popular accessories for beach weddings as well as just hanging out poolside.  Be sure not to use metal beads or charms, because they will get very hot in the sun.

-Mandy

May 8, 2012

How To Make Feather Moccasins


Those decorative moccasins are really cute but usually way overpriced.  A older pair of my moccasins were looking a little rough, so I thought it would be fun to give them a facelift.


1.  You'll need a pair of moccasins, scrap leather, scissors, shoelace (optional), needle, thread, and tweezers (optional).  For the needle, you can use a leather needle or regular needle.  I actually find the leather needles to be more difficult.
2.  These first few steps are optional.  The lacing around my shoe was very stiff, and I wanted to replace it with a softer shoelace.  First, I needed to remove it.
3.  Relace the shoe with the new shoelace.
4.  I had a few trouble spots when trying to relace my shoes and needed to use tweezers.
5.  Fit your moccasin onto your foot and tighten the new laces.  Tie the ends in a knot.  Repeat steps 2-5 for the other shoe.
6.  Cut some simple feather shapes out of scrap leather.  I found mine at Hobby Lobby.  It's best to use sharp fabric scissors.
7.  Start with one feather and stitch it onto your shoe.  Move onto the next feather.  Repeat this step for the other shoe.

Of course you don't have to use feathers at all.  Try another shape or maybe a cute animal face.  Also try changing up the placement if you like.  Hope you enjoyed this one!

 -Mandy

April 24, 2012

Make Your Own Map Shoes


Here's a project for the travel lovers!


1.  You'll need a pair of canvas shoes, a large map or atlas, Mod Podge, a paintbrush, and some newspaper (optional).

2.  To keep the shape of your shoes, stuff them with newspaper.  Brush some Mod Podge onto one of your shoes.  Concentrate on small areas at a time (Mod Podge dries quickly).

3.  Tear apart small pieces of your map and place it on the freshly glued area.  Continuously add more Mod Podge on the shoe to glue and seal the map pieces.  Repeat this step until both shoes are covered.

4.  Let the Mod Podge dry for at least an hour, then your new shoes are ready to wear!  Your shoes might be a little crunchy sounding for the first few wears.

-Mandy


P.S.  Check out my other Mod Podge project here!

March 27, 2012

How to Make Felt Pinwheels


My friend asked if I could make her some pinwheel bobby pins for her short hair.  They turned out to be very simple to make.  I ended up making several in different colors.


You'll need scissors, felt, a needle, thread, beads/buttons (optional), hot glue gun (optional), and bobby pins.

1.  Cut a small square out of your felt.  The size is up to you.
2.  Cut a slit at each corner of the square.  Do not cut all the way.
3.  You'll now have four triangle shapes in your square.  Fold in a corner of one of the triangles towards the center.
4.  On the triangle to the right of the first one, fold in a corner.  Place this corner on top of the previous corner.
5.-6.  On the next two triangles, repeat step 4.
7.  All of the corners should be stacked creating the pinwheel shape.
8.  Using your needle and thread, sew the corners in place.  You can add a bead or button for decoration.
9.  Attach your bobby pins.  This can be done a number of ways.  *For mine, I cut out a small circle of felt and hot glued it to the pinwheel with the bobby pin sandwiched in between.  These bobby pins had a flat pad on them which is perfect for crafting.  If you choose to use regular bobby pins, you can sew them on.

Instead of hair accessories, the pinwheels could be glued to a stick as a decoration or sewn to elastic to make a ring.  :)

-Mandy